Home About Us Customer Service Order Info Shopping Cart Contact Us Catalog Request PDF Documents
Search:   
 
  Customer Login  + 
Your Cart
Shop by Brand
Categories
The MSS-20 series air motor spindles incorporate a specifically designed 30,000rpm air motor. The 8,000 and 2,000rpm versions also utilize a high-precision small planetary gear speed reducer system – the 8,000rpm spindles have built-in 1/4 motor speed reduction, thereby increasing the torque by four times the motor torque - the 2,000rpm spindles have a 1/16 motor speed reduction, thereby increasing the torque by 16 times over the motor torque. The MSS-20 spindles are designed to be mounted into a 0.79”/20mm diameter holder. This greatly extends the capabilities of existing NC and CNC lathes and screw machines. Each speed spindle is available in either a straight or right-angled air connection configuration depending on the mounting and plumbing restrictions in your installation. These spindles are specifically designed for long-term, continuous use in high-speed machining applications and can be used in conjunction with water or oil based coolants.

CAUTION - DO NOT over tighten the clamping of these spindles, nor allow set screws to press directly against the spindle housing. The outer housing is (SUS416) precision ground to +0/-0.01mm.
- The MS series spindles are designed to operate smoothly at high speeds for long hours of continuous drilling or milling when coupled with an appropriately adjusted air line kit (filter/regulator/micro-mist oiler). We highly recommend using the manufacturer's air line kit, as this item includes a special micro-mist (atomizing) lubricator not usually found on most commercially available air line kits.
- Use only the manufacturer’s recommended spindle lube oil – Chevron Superla 9.

To order a complete spindle system, specify the desired
MS SERIES SPINDLE
EXTRA COLLETS (as needed)
AIR LINE KIT


MSS-20 Series - Ø0.79" (Ø20mm) Diameter - 63 Watt



NSK MSS-20 Series Air Spindle
SKU: MSS-2030R
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK MSS-20 Series 90 degree Air Spindle
SKU: MSS-2030RA
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi Special DCH Drill Chuck Arbor
SKU: DCH-JOA
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi Special KCH Metal Saw Arbor
SKU: K301085
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Collet Nut for CHA
SKU: K-263
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi CHA Collet
SKU: 91405
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi CHN-A Collet Nut for CHA
SKU: CHN-A
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi Air Line Silencer
SKU: AA10040
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi AL-M1203B32 AL951 Air Line Kit
SKU: AL-M1203B32
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Nakanishi ALM1202 Air Line Kit
SKU: AL-M1202
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


NSK Grindstone Arbor
SKU: NCH-01
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.


Spindle Lubricating Oil
SKU: AA10478
See details

Pricing and ordering restricted to registered users.
Please login or go to our registration page.

Terms & Conditions | Privacy Policy | Shipping Policy | Site Security | Legal | Site Map
Copyright © 2005-2017 ARTCO - American Rotary Tools Company
Design by 7dana.com