|Home About Us Customer Service Order Info Shopping Cart Contact Us Catalog Request PDF Documents|
Customer Login +
Customer Login -
Shop by Brand
The MST-23 series air motor spindles incorporate a specifically designed 30,000rpm air motor. The 8,000 and 2,000rpm versions also utilize a high-precision small planetary gear speed reducer system – the 8,000rpm spindles have built-in 1/4 motor speed reduction, thereby increasing the torque by four times the motor torque - the 2,000rpm spindles have a 1/16 motor speed reduction, thereby increasing the torque by 16 times over the motor torque. The MST-23 spindles are designed to be mounted into a 0.91” diameter holder. This greatly extends the capabilities of existing NC and CNC lathes and screw machines. Each speed spindle is available in either a straight or right-angled air connection configuration depending on the mounting and plumbing restrictions in your installation. These spindles are specifically designed for long-term, continuous use in high-speed machining applications and can be used in conjunction with water or oil based coolants.
CAUTION - DO NOT over tighten the clamping of these spindles, nor allow set screws to press directly against the spindle housing. The outer housing is (SUS416) precision ground to +0/-0.01mm.
- The MS series spindles are designed to operate smoothly at high speeds for long hours of continuous drilling or milling when coupled with an appropriately adjusted air line kit (filter/regulator/micro-mist oiler). We highly recommend using the manufacturer's air line kit, as this item includes a special micro-mist (atomizing) lubricator not usually found on most commercially available air line kits.
- Use only the manufacturer’s recommended spindle lube oil – Chevron Superla 9.
To order a complete spindle system, specify the desired
MS SERIES SPINDLE
EXTRA COLLETS (as needed)
AIR LINE KIT
MST-23 Series - Ø0.91" (Ø23mm) Diameter - 108 Watt