|
This single position tool holder allows you to create a custom set up to accommodate any job. Allows spacing tools of varying lengths, so as not to hit the collet when using a shorter tool. Offset bore provides clearance for use with OD insert turning bar. RH = bore to the right when facing spindle; LH = bore to the left (as shown in photo).
Smaller width to save space in the X axis. Differential spacing of the holes in each holder allow different tool configurations for narrow and wide spaced tools on one block. An end stop mounted to the table provides repeatable location of the tool block for quick changeover of setups.
| Order # |
Description |
A |
B |
C |
| TBS-1356 |
3/8” Center, 5/8” Bore, RH |
0.625 |
0.375 |
1.5 |
| TBS-1357 |
3/8” Center, 5/8” Bore, LH |
0.625 |
0.375 |
1.5 |
| TBS-1456 |
1/2” Center, 5/8” Bore, RH |
0.625 |
0.500 |
1.5 |
| TBS-1457 |
1/2” Center, 5/8” Bore, LH |
0.500 |
0.625 |
1.5 |
| TBS-1466 |
1/2” Center, 3/4” Bore, RH |
0.500 |
0.750 |
1.5 |
| TBS-1467 |
1/2” Center, 3/4” Bore, LH |
0.500 |
0.750 |
1.5 |
| TBS-1426 |
12mm Center, 20mm Bore, RH |
12.7mm |
20 |
38mm |
| TBS-1427 |
12mm Center, 20mm Bore, LH |
12.7mm |
20 |
38mm |
|
TBS-1666 |
3/4” Center, 3/4” Bore, RH |
0.750 |
0.750 |
1.5 |
| TBS-1667 |
3/4” Center, 3/4” Bore, LH |
0.750 |
0.750 |
1.5 |
| TBS-1626 |
19mm Center, 20mm Bore, RH |
19mm |
20mm |
38mm |
| TBS-1627 |
19mm Center, 20mm Bore, LH |
19mm |
20mm |
38mm |
Please select order # below:
| Details |
| |
| SKU |
TBS-1356 |
| Weight |
0.00 lbs |
| Price: |
$115.00
|
|
Options
|
| |
|
|
| Order # |
|
| Quantity |
|
|
|
Home » Machine Tool Spindles » ECI Gang Lathe Tool Holders » Gang Lathe Tool Holders » Single Position Tool Holder
