Suhner Rotofera Flexible Shaft 1.3 Hp Motor


Suhner Rotofera Flexible Shaft 1.3 Hp Motor

Add Your Review
Availability: In Stock
Product SKU: 11018423
Prop 65
Warning

This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.

Tariffs
Tariffs

Please note that all prices listed on our website are subject to change without notice. Adjustments may occur due to fluctuations in tariff charges and import costs.

$5,650.65
Metal fabricators, tank and boiler makers, mold and die shops, tire industries, foundries, boat and ship building, aircraft and aerospace industries, motor and construction machinery industries, and countless other shops and factories all find uses for this versatile tool. A wide selection of handpieces is available for the Suhner Rotofera. This tool can be used for grinding, sanding, cutting, deburring, derusting, drilling, milling, routing, finishing, buffing, and polishing.

Features:
• 1.34 Horsepower (1000W), 3-phase induction motor
• Geared Speeds: 1000, 1900, 2500, 3800, 6800,
9600, and 14,400 rpm.
• Available in either 230 or 460 Volt, 3-Phase
• Available with pedestal base (F) or dolly base (STM)
• Motor weight ~ 37 lbs. on bench mount,
83 lbs. on dolly

Standard Flexshaft Unit consists of:
(ordered separately)
• Rotofera-F bench mounted Motor or
Rotofera-STM dolly mounted Motor (specify Voltage)
• NA10 D10/G28 x 2000mm Flexshaft Assembly
• FH-10 Straight Handpiece with 1/4"collet and
wrenches

Optional Equipment:
• NA12 Heavier-duty Flexshaft Assembly
• FH-12 Straight Handpiece with 1/4" collet
• FSM-2:1 6"dia. Angle-Grinding Handpiece
• Wi-10-L Right-Angle Handpiece, extended version
• Wi-10 Right-Angle Handpiece with 1/4" collet
• BSG-10/50 2" wide Belt Sanding Handpiece
• FH-10-L Extended Handpiece for reaching otherwise inaccessible areas.
Metal fabricators, tank and boiler makers, mold and die shops, tire industries, foundries, boat and ship building, aircraft and aerospace industries, motor and construction machinery industries, and countless other shops and factories all find uses for this versatile tool. A wide selection of handpieces is available for the Suhner Rotofera. This tool can be used for grinding, sanding, cutting, deburring, derusting, drilling, milling, routing, finishing, buffing, and polishing.

Features:
• 1.34 Horsepower (1000W), 3-phase induction motor
• Geared Speeds: 1000, 1900, 2500, 3800, 6800,
9600, and 14,400 rpm.
• Available in either 230 or 460 Volt, 3-Phase
• Available with pedestal base (F) or dolly base (STM)
• Motor weight ~ 37 lbs. on bench mount,
83 lbs. on dolly

Standard Flexshaft Unit consists of:
(ordered separately)
• Rotofera-F bench mounted Motor or
Rotofera-STM dolly mounted Motor (specify Voltage)
• NA10 D10/G28 x 2000mm Flexshaft Assembly
• FH-10 Straight Handpiece with 1/4"collet and
wrenches

Optional Equipment:
• NA12 Heavier-duty Flexshaft Assembly
• FH-12 Straight Handpiece with 1/4" collet
• FSM-2:1 6"dia. Angle-Grinding Handpiece
• Wi-10-L Right-Angle Handpiece, extended version
• Wi-10 Right-Angle Handpiece with 1/4" collet
• BSG-10/50 2" wide Belt Sanding Handpiece
• FH-10-L Extended Handpiece for reaching otherwise inaccessible areas.